TM 9 4910-387-14-2
5 Remove both leads. Connect one multimeter lead to
reverse tachometer reversing relay coil contact (12) and to
reverse starter coil contact (13) checking for reading of
approximately 100 ohms.
G. TACHOMETER GENERATOR CABLE ASSEMBLY OR
TACHOMETER INDICATOR CABLE ASSEMBLY MAY
BE DEFECTIVE.
6 If resistance is not present, replace the open wire (p 6-219).
Refer to page 6-118 for troubleshooting procedures.
7 If TACHOMETER indicator assembly does not indicate, proceed to sep G.
t
6-125
