TM 9 4910-387-14-2
C.
WIRES MAY BE OPEN.
1 Connect one multimeter lead to terminal B14 (1).
Connect the other lead in sequence to FAST
switch contact (2) and remote control motor
contact (3).
NOTE
Wire at main drive motor that comes
from the remote control motor is not
tagged with a number. Identify wire
checks. Remove tape from wire ends.
After making checks, apply new tape
2 Remove both leads. Remove cover from wire
outlet box on main drive motor. Connect one
other lead to wire end that is connected to wires
tagged no. 1 and 7 at main drive motor.
3 Remove both leads. Connect one multimeter
lead to remote control motor contact (5) and
connect other lead to the wire end that is
connected to wires tagged no. 4, 5, and 6 at
main drive motor.
6-129