TM 9-4910-387-14-2
6-6. LH CONTROL EQUIPMENT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY OF LH MOUNTING BOARD ASSEMBLY (cont)
53 WIRE. Position one end with terminal lug on terminal A6 and
position other end on starter microswitch contact (64).
54 SCREW (65). Install through terminal lug into terminal A6.
55 WIRE. Position one end on starter microswitch contact (64) and
position other end on starter microswitch contact (66).
56 TWO SCREWS (67 AND 68). Tighten.
6-238
