(alternator) regulator for closing and opening voltage.
contact of the cover assembly as
tact of the cover assembly as shown
shown in figure 56.
i n figure 55. Place a jumper lead
(c) Connect two test leads to the posi-
f r o m the "B" contact to the "C"
t i v e (red) binding post and nega-
c o n t a c t of the cover assembly as
tive (black) binding post of the
shown in figure 55.
pile flutter, and the headset to the
phone jack of the pile flutter as
cuit selector switch (fig. 55) is in
shown in figure 55.
t h e "VARIABLE VOLTS" position
(d) Connect the positive (red) binding
and turn the dc voltmeter range se-
post of the pile flutter to the "C"
lector switch (fig. 55) to the
c o n t a c t of the cover assembly and
2 0 (X2) position. Slowly turn the
the negative (black) binding post
d c variable power supply control
of the pile flutter to the "A" con-
