TM 9-4910-586-14 & P
7. Reattach the part to the Stand (refer to paragraph 3-17 for assembly procedures).
DISASSEMBLY
3-11. The following procedures detail disassembly of the Stand. Retain all attaching hard-
w a r e for reassembly. Refer to figure 1 for parts location.
1. Remove attaching screw, nut, and washers from base of the support assembly
(item 10).
2. Lift support assembly from Stand base assembly.
1. Remove four attaching screws, nuts, and washers from each Stand base assembly
mounting plate (item 16).
2. Remove each wheel assembly (items 6 & 15) and wheel assembly mounting plate
(item 3A).
1.
Loosen setscrew (item 5) and remove foot (item 4).
2.
Using suitable wrench, unthread locking screw (item 2) by turning counterclock-
wise.
3 . Remove locking screw.
Removal of Rear Brace (Left and Right Legs)
1.
Remove attaching screw, washer, and nut securing left and right legs (item 19).
2 . Remove attaching screw, washer, and nut securing left leg and remove left leg.
R e m o v e attaching screw, washer, spacer, and nut securing right leg and remove
3.
right leg.
ASSEMBLY
a t t a c h i n g screws securely.
