TM -9-2330-373-14 & P
TO OPERATE
(1) from
crossmember and place it on
ground in
alinement with jack.
1. Shoe
2. Pull out two pins (1) securing jack and long
brace (3) to rear crossmember and allow jack to
swing down to the vertical position.
3. Pull out two pins (2) securing short brace (4) on
jack. Attach one end of brace to gusset (5) on
side of jack.
1.
Pin
2.
Pin
3.
Long brace
4.
Short brace
5.
Gusset
4. Using pin (2), secure short brace (4) to bracket
on van located to rear of wheels.
5. Using pin (1), secure long brace (3) to bracket
on van that jack was attached to when stowed.
1.
Pin
2.
Pin
3.
Long brace
4.
Short brace
5.
Gusset
TA 314719
2-21