TM 9-2330-381-14
2-28. SINGLE WINCH LOADING AND UNLOADING (U.S.M.C. ONLY) (CONT)
(4) Loosen clamp handle (3) and remove stow clamp (4) to release snatch block (2) from stowed position on
platform.
(5) Deleted.
WARNING
Observe the following precautions during the unloading process:
If possible, provide ample clear space behind the disabled payload during
unloading to protect personnel and prevent damage to equipment should cable
break while payload is being unloaded.
All ground personnel must stand clear of winch cable except when handling or
injury to personnel may result.
Make sure winch cable is not kinked, devises are secured to winch cable, and
snatch block and shackles are in good condition and properly secured or injury to
personnel may result.
Make sure winch cable is inspected in accordance with TB 43-0142 or injury to
personnel may result.
Extreme caution should be exercised during any operation on a slope.
2-180 Change 1