(a) Check for cuts, tears, missing or damaged attaching hardware.
(b) Replace as necessary.
(a) Check for bent, cracked, or deformed panels,
(b) Assure all insulation is firmly attached and has not deteriorated.
(c) Repair or replace as necessary.
1. Canvas Cover. Minor rips, cuts, tears, or punctures maybe repaired by applying
a patch to the inside surface.
(a) Sheet Metal. Repair the sheet metal panels as necessary to remove bends,
cracks, deformations, and gouges.
Dry cleaning solvent used to clean parts is potentially dangerous to
personnel and property.
Do not use near open flame or excessive heat. Flash point of
solvent is 100 F to 138 F (38 C to 59 C).
Remove insulation and sealing strips by scraping and peeling. Solvent
can be used to assist in this task.
Thoroughly clean all adhesive from panel surface using solvent.
Apply a coat of adhesive to both surfaces. Allow adhesive to dry until
Apply insulation to panels and press firmly in place. Allow to dry.