TM9-4120-401-14
4-29.
FAULT INDICATOR, LIGHT EMITTING DIODE (DS1, DS2, DS3, AND DS4). - continued
c. Replace.
(1) Tag lead going to connector (7). Release and remove contact pin.
(2) Tag leads and cut cap splice off wire bundle.
(3) Carefully push light emitting diode (6) out of control panel (4).
(4) Carefully push new light emitting diode (6) into control panel (4).
(5) Crimp new connector (7) pin onto black light emitting diode (6) lead and insert into connector (7).
(6) Strip red leads and bundle using cap splice.
(7) Remove tags.
(8) Secure control panel (4) to box (5) using four sets of screws (1), lock washers (2), and flat washers (3).
NOTE
FOLLOW-ON MAINTENANCE: