TM 9-2330-211-14&P
4-15. WIRE CONNECTORS (Con't)
ACTION
REMARKS
ITEM
LOCATION
a. Using wire stripper, strip insulation 1/8 in. (3.2 mm)
Wire lead (4)
13.
from end.
b. Apply insulating compound to end and slide on
shell (9) and insulator (8).
Slide onto wire lead (4). Crimp end over insulation
New terminal (7)
14.
and center over bare wire using crimping tool.
Slide down over terminal (7) until seated.
Shell (9) and
15.
insulator (8)
Apply insulating compound to outside of male
16.
Connectors
connector and push together until seated.
(5 and 6)
Check for operation.
Lights
17.
Semitrailer
MARKER BAND REPLACEMENT
18.
Wire lead (4)
Marker band (11)
Using flat-tip screwdriver, open tab ends (10) and
take off.
Note number on marker band (11) and
discard.
19.
New marker band (11)
Place on wire lead (4) and bend tab ends (1 0) over
wire lead (4) using crimping tool.
Mark number of wire lead on new marker
band.
TA506858
4-40