TM 9-2330-211-14&P
4-14. WIRING HARNESS (Con't)
ACTION
REMARKS
ITEM
LOCATION
Screw on and tighten using
in. wrench and
Seven screws (23),
40.
Seven clips (28)
flat-tip screwdriver.
Iockwashers (24),
and nuts (25)
Wiring harness (11)
Starting at main beam, pull wiring harness (11)
41.
Rear of
along crossbeam to left and right clearance lights
semitrailer
(16).
Put onto wiring harness (11).
Eight clips (37)
Wiring harness (11)
42.
Ensure that there is enough slack for
to rear of
composite and clearance light connec-
semitrailer
tions.
Eight screws (23),
Screw on and tighten using
in. wrench and flat-tip
Eight harness
43.
screwdriver.
lockwashers (24),
clips (37)
and nuts (25)
Put onto wiring harness (11) and push into place.
Four grommets (38,
44.
Grommet holes at
rear of main beam,
36, and 35)
crossbeam, and
axle crossbeam
4-35
