TM 9-2330 -211-14&P
4-14. WIRING HARNESS (Con't)
ACTION
REMARKS
ITEM
LOCATION
Put onto wiring harness (11) and allow enough slack
Two clips (13)
45.
Inside gooseneck
for connection.
Screw on and tighten using 7/16 in. wrench and
46.
Two clips (13)
Two screws (12),
flat-tip screwdriver.
Iockwashers (14),
and nuts (15)
Put onto wiring harness (11) and push into place.
47.
Three grommets (18)
Match and connect to electrical connectors with
Front and rear of
48.
Four clearance light
same wire numbers. Wire number 24-484 goes
semitrailer
electrical connectors
t o left blackout taillight, 22-461 to left service
(20) and eight
stop, 24-483 to right blackout tail, 21 to service
composite light
taillights, 489 to service clearance, 23 to Ieft and right
light electrical
blackout stop, and 22-460 to right service stop.
connectors (27)
Refer to wiring diagram (para 4-19).
Place electrical connectors (20 and 27') into clips
49.
Four clearance light
and eight composite
(39).
light clips (39)
TA506855
4-36
