into position, and slowly lower it
the truck the lifting device, and the
onto the truck body.
shelter. To eliminate confusion, all
instructions must come from the load-
ing crew supervisor.
long) to each rear towing eye.
(10) Remove the lifting ring from the
Check to see that all tools and equip-
lifting hook and disassemble the lift-
ment are removed from the truck
ing ring and sling hooks. Remove the
body. Lower the truck tailgate.
sling center hooks from the shelter
S lO Wly lift the shelter from the
lifting eyes and the ropes from the
ground to a position high enough to
shelter towing eyes.
clear the body of the truck.
b. Securing AN/MSC-32 on Truck (fig.
Back the truck into position under
26). Secure the shelter on a truck as follows:
(1) Use the sling hooks farthest from
W a r n i n g : All personnel must re-
the turnbuckles and hook each of the
main clear of the truck while the shel-
four sling hooks to a tiedown eye on
ter is being lowered into position.
(2) Use the sling assembly cable at-
(9) Position a man at each of the ropes
tached to the tiedown eye at the
((5) above) to guide the shelter