TM 5-2420-230-10
(1)
(2)
Ensure spare tire is stowed on backhoe bucket (Para 8-6).
(3)
(4)
(5)
Ensure turnbuckles are installed on backhoe stabilizer (Para 7-7).
(6)
Position IHMEE where it is to be parked.
(7)
Deploy FEL travel stops and remove locking clevis from 4-in-1 bucket (Para 6-2).
(8)
If installed, lower 4-in-1 bucket to the ground, ensuring that bucket is rolled forward and teeth are on ground
(9)
If installed, lower forklift attachment to the
ground, ensuring that forklift tines are
Ensure MODE CONTROL switch is set to
ROAD/BACKHOE before shutting OFF
engine. Failure to do so will allow suspension
to rise and may result in injury to personnel.
(10) Ensure MODE CONTROL switch is set to
NOTE
Step (12) only applies if vehicle is equipped
with a cold weather kit and the ambient
temperature will average below 0 F (-18 C).
(12) Plug in electrical outlet (1) with an extension
LED (2) on battery trickle charger (3) should
light.
Change 1