TM 55-1925-284-14&P
OPERATOR MAINTENANCE
MARINE SANITATION DEVICE FOR
INLAND AND COASTAL LARGE TUG (LT)
CONTROLLER, REPAIR
INITIAL SETUP:
References:
Tools and Special Tools:
FM 55-502
Tool Kit, General Mechanic's (Item 1, Table 2,
Materials/Parts:
Tag, Danger (Item 7, Table 1, WP 0039 00)
Lamp, Incandescent (Item 3, Figure 2,
Equipment Conditions:
Set to OFF the MSD DISCHARGE PUMP AND
Personnel Required:
BLOWER circuit breaker in 440V power panel
Two Watercraft Engineers, 88L
No. 4. Lock out and tag out (FM 55-502).
LAMP REPLACEMENT
REMOVAL
WARNING
Replace or repair components only after the affected circuit has been secured,
locked out, and tagged out. Performing replacement with the circuit energized
may result in injury.
1. Unscrew and remove the light indicator lens cap (figure 1, item 1) from the indicator light housing (figure 1, item 2).
2. Unscrew and remove the lamp (figure 1, item 3) from the indicator light housing (figure 1, item 2).
0015 00-1
