TM 55-1925-284-14&P
0018 00
5
3
1
4
2
Figure 1. Silencer Replacement
INSTALLATION
1. Wrap the male pipe threads (figure 1, item 4) with antiseizing tape.
2. Install the pipe fittings (figure 1, item 3) in the silencer (figure 1, item 2).
! CAUTION
Never attempt to connect union connections with only one wrench. Damage to the
vessel's standing piping could occur. Always use two wrenches.
3. Connect the union (figure 1, item 1) on the silencer (figure 1, item 2).
4. Remove the lockouts and tagouts (FM 55-502).
5. Operate the MSD under usual conditions (WP 0005 00).
6. Check the blower for proper operation.
7. Return the equipment to the desired readiness condition.
END OF WORK PACKAGE
0018 00-2
