TM 55-1925-284-14&P
0021 00
6. Remove the pressure gauge (figure 1, item 6) from the tee fitting (figure 1, item 4).
8. Remove the four nuts (figure 1, item 7) and the four lockwashers (figure 1, item 8) from the studs (figure 1,
item 9) that secure the blower (figure 1, item 10). Discard the lockwashers.
9. Remove the blower (figure 1, item 10) from the mounting plate (figure 1, item 11).
10. Remove the tee fitting (figure 1, item 4) and remaining blower discharge fittings (figure 1, item 12) from the
blower (figure 1, item 10).
5
4
2
6
7
8
1
3
12
9
10
11
Figure 1. Blower Assembly
0021 00-2