TM 55-1925-286-13&P
0021 00
4
6
7
8
3
2
1
5
Figure 1. Electric Motor
WARNING
Replace the air compressor motor only after the affected circuit has been se-
cured, locked out, and tagged out. Performing replacement with the circuit ener-
gized may result in injury or death.
4. Use a multimeter to check for available voltage at the motor's wiring (figure 2, item 1). If voltage is available,
ensure that the proper circuit breakers are secured, locked out, and tagged out (FM 55-502). If no voltage is
available, continue with the procedure.
5. Label, disconnect, and remove the wiring (figure 2, item 1) from the junction box (figure 2, item 2).
6. Loosen the four mounting bolts (figure 2, item 3) and slide the motor (figure 1, item 3) toward the compressor
(figure 1, item 4).
7. Remove the three lower screws (figure 1, item 5) and one upper screw (figure 1, item 6) that secure the belt
guard (figure 1, item 7). Remove and set aside the belt guard.
0021 00-2