TM 55-1930-208-10
3-12. HYDRAULIC PUMP.
This task covers:
a.
Removal
b.
Installation
SET-UP:
Tools Required:
Tool Kit, General Mechanic's
Materials Required:
Washer, Lock P/N WA5-1OCA
Equipment Conditions:
Engine shut down (paragraph 2-11).
Vessel is moored (paragraph 2-7).
a. Removal. (Refer to figure 3-9).
(1) Open relief valve on hand pump and release system pressure.
(2) Disconnect hoses (1 thru 3).
(3) Remove adapter (4), elbows (5 and 6), and nipple (7).
(4) Remove four screws (8), four lockwashers (9), and pump (10).
b. Installation.
(1) Install pump (10) on engine and secure with four lockwashers (9) and four screws (8).
(2) Install nipple (7), elbows (6 and 5), and adapter (4).
(3) Connect hoses (3 thru 1).
3-30
