TM 55-1930-208-10
3-14. HYDRAULIC FILTER MAINTENANCE.
This task covers:
a.
Removal
b.
Disassembly
c.
Inspection
d.
Reassembly
e.
Installation
SET-UP:
Tools Required:
Tool Kit, General Mechanic's
Materials Required:
O-Ring P/N GA100201
Sealant, Pipe (Item 12, Appendix D)
Equipment Conditions:
Engine shut down (paragraph 2-11).
Vessel is moored (paragraph 2-7).
a. Removal. (Refer to figure 3-11).
(1) Open relief valve on hand pump and release system pressure.
(2) Remove two nuts (1), two lockwashers (2), and three screws (3).
Remove top of pipe hanger.
(3) Disconnect hoses (4 and 5).
(4) Remove two connectors (6) and filter (7).
Figure 3-11. Filter, Removal/Installation.
3-34
