TM 55-1930-208-10
b. Disassembly. (Refer to figure 3-12).
(1) Remove end cap (1) and O-ring (2). Remove and discard O-ring (2).
(2) Remove filter element (3), plate (4), and spring (5). Discard filter element (3).
c. Inspection.
(1) Inspect end cap (1) and filter housing (6) for damaged threads.
(2) Inspect plate (4) and spring (5) for damage.
d. Reassembly.
(1) Install spring (5), plate (4) and new filter element (3) in filter housing (6).
(2) Install new O-ring (2) and end cap (1).
Figure 3-12. Filter, Servicing and Inspection.
3-35
