TM 55-1930-208-10
3-17. FUEL STRAINER.
This task covers:
a.
Removal
b.
Installation
SET-UP:
Tools Required:
Tool Kit, General Mechanic's
Materials Required:
Washer, Lock P/N MS35338-46
Equipment Conditions:
Engine shut down (paragraph 2-11).
Vessel is moored (paragraph 2-7).
a. Removal. (Refer to figure 3-15).
(1) Remove screw (1), flat washer (2), and clamp (3).
(2) Remove tube (4), elbow (5), and adapter (6).
(3) Remove two clamps (7), hose (8), and adapter (9).
(4) Remove fuel cartridge (10).
(5) Remove two nuts (11), two lockwashers (12), two screws (13), and remove cover (14).
(6) Remove two screws (15), two lockwashers (16), and bracket (17).
b. Installation.
(1) Position bracket (17) on engine and secure with two lockwashers (16) and two screws (15).
(2) Position cover (14) on bracket (17) and secure with two screws (13), two lockwashers (12), and two nuts
(11).
(3) Install fuel cartridge (10).
(4) Install adapter (9), hose (8), and two clamps (7).
(5) Install adapter (6), elbow (5), and tube (4).
(6) Install clamp (3) and secure with flat washer (2) and screw (1).
3-40
