TM 55-1930-208-10
3-14. HYDRAULIC FILTER MAINTENANCE - Continued.
e. Installation. (Refer to figure 3-11).
(1) Apply pipe sealant (item 12, Appendix D) on connector (5).
(2) Install filter (6) and connector (5).
(3) Connect hose (4).
(4) Position top of pipe hanger over filter and secure with two screws (3), two lockwashers (2), and two nuts (1).
(5) Recharge the accumulator using the hand pump.
3-15. AIR CLEANER ASSEMBLY.
This task covers:
a.
Removal
b.
Inspect
c.
Service
d.
Installation
SET-UP:
Tools Required:
Tool Kit, General Mechanic's
Materials Required:
Solvent, Cleaning (Item 1, Appendix D)
Oil, Lubricating (Item 4, Appendix D)
Oil, Fuel (Item 9, Appendix D)
Packing P/N 1543005
Equipment Conditions:
Engine shut down (paragraph 2-11).
a. Removal. (Refer to figure 3-13).
(1) Remove bolt (1), retainer (2), and gasket (3). Discard gasket (3).
(2) Remove upper shell (4), retaining ring (5), baffle (6), cup (7), and packing (8). Discard packing (8).
b. Inspection.
(1) Inspect cup (7) for damage.
(2) Inspect upper shell (4) for damage to housing or internal filter element. Filter element cannot be replaced.
3-36
