TM 9-1345-203-12
(8) For long term emplacement, coat fuze
Figure 2-21. Fuze well.
with silicone grease G-697 (fig. 2-24) and
smear layer of grease on threads and
(5) Set mine down, pick up fuze metal
walls of fuze well of mine.
container M603 (fig. 2-22).
G-697.
(9) Remove safety clip from between
(6) Open container with keyway attached to
pressure plate and body of fuze. (Can be
bottom of can.
done with hook end of wrench M20.)
(7) Remove fuze (fig. 2-23). Assure safety
Retain safety clip for future use, if
clip is in place between pressure plate
required to disarm mine.
and body of fuze. Turn fuze over and
(10) Insert fuze into fuze well. Assure fuze is
assure that varnished or painted lining
seated securely on top of booster retainer.
compound, on end of detonator, shows in
Put no pressure on pressure plate when
bottom of fuze.
handling fuze.
