TM 9-1345-203-12
rods (fig. 2-30). Prior to removing fuzes
NOTE
from metal container, visually inspect all
A modified safety pin has been
three fuzes for proper assembly of safety
produced which has a bend (hook) at
pin (figs. 2-31, 2-32, and 2-33). Inspect
the end of the pin. Either the original
plastic collar of each fuze by looking down
or modified pin may be used.
through top of pressure ring. If safety pin
However, when using the modified
is missing or improperly assembled, or if
(hook) type, it must be unhooked
plastic collar appears cracked, leave
before resafing, and rehooked after
deficient fuze(s) in container and remove
being placed in the proper resafing
good fuzes. Turn in defective fuze(s) in
position. Otherwise the functions
container to ammunition supply point for
are the same.
disposal.
(10) Remove the three packages of extension
right side.
be assembled inside safety band.
