TM 9-1345-203-12
(11) If safety pin is assembled properly and
(14) Screw fuze clockwise hand-tight into
collar is not cracked, remove one fuze
threaded fuze well of mine (fig. 2-36).
from its fiber sleeve along with one
Remove extension rod from packaging.
package of extension rods (fig. 2-30).
To tighten fuze, insert one unthreaded
(12) Coat fuze threads and gasket with silicone
end of extension rod piece in the hole on
grease G-697 or equivalent prior to
the side of the adaptor and turn the fuze a
removing end closure (fig. 2-34). Obtain
quarter turn. After fuze is secure, remove
grease from supply (Appendix D).
extension rod for further use (fig. 2-37).
(13) Unscrew and remove end closure on the
M624 fuze (fig. 2-35).
