TM 9-2320-211-10-1
FRAME 2
Refer to para 4-6a, b.
1.
Start engine.
2.
Step on clutch pedal (1) and press it all the way down.
Place FRONT TRANSMISSION gearshift lever (2) in position 1.
3.
4.
Move TRANSFER CASE lever (3) down to LOW position.
Let clutch pedal (1) up.
5.
Push handbrake (4) to down (brake off) position.
5.
WARNING
Do not attempt to ford your truck in depths greater than
30-inches without a deep water fording kit installed.
Keep your speed, while fording, down to 3 to 4 miles
per hour.
After fording do not rely on brakes until they dry
out. Keep putting them on until truck stops without
brakes grabbing.
7.
Make sure your engine is running correctly and start fording.
8. After leaving the water, stop engine. Refer to para 4-6e.
GO TO FRAME 3
