TM 9-2330-203-14&P
4-12. STOPLIGHT-TAILLIGHT REPLACEMENT (M197A1 AND M198A1) (Con't).
b. INSTALLATION
NOTE
If installing new stoplight-taillight, perform steps 1 and 2. If shells were not removed, go
to step 3.
1.
Remove washer and shell from wire (5) marked 460 or 461. Discard washer and shell.
2.
Splice wire (5) into wire (6) marked 22.
3.
Install two washers (10) and shells (9) on wires (6).
4.
Install stoplight-taillight (3) on bracket (4) with two screws (8) and new lockwashers (7).
5.
Connect stoplight-taillight shells (9) to chassis wiring harness connectors (1) and install in retainer (2). Remove
tags.
FOLLOW-ON TASKS:
Connect intervehicular cable to towing vehicle (para 2-10).
Check operation of light.
4-15
