TM 9-2330-203-14&P
4-13. INTERVEHICULAR CABLE REPLACEMENT.
This Task Covers:
a. Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Intervehicular cable disconnected from towing ve
General mechanic's tool kit
hicle (para 2-14).
a.
REMOVAL
1.
If working on M197A1 or M198A1, disconnect 12-volt (3) or 24-volt (4) intervehicular cable from chassis wiring
harness.
2.
Lift up on hook (2) and remove intervehicular cable (3 or 4) from under hook.
3.
Open right (5) or left (1) stowage compartment cover of intervehicular cable to be replaced.
4.
Remove two nuts (7) and screws (9) and remove clamp (8). Remove intervehicular cable (3 or 4) from dolly.
5.
Remove band marker (6) if damaged.
4-16
