TM 9-2330-203-14&P
4-14. CHASSIS WIRING HARNESS REPLACEMENT (M197A1 AND M198A1).
This Task Covers:
a. Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Intervehicular cable disconnected from towing ve-
Ten lockwashers
Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
1. Tag wires if identification bands are missing or
illegible.
2. Remove two chassis wiring harness connectors
(1) and stoplight-taillight connectors
(3) from retainer (2) and disconnect.
3.
Remove nut (7), lockwashers (6), and screw (4) from strap (5). Discard lockwashers.
4.
Remove two screws (9), lockwashers (11), and nuts (12) from strap (10) and retainer (2). Discard lockwashers.
5.
Remove retainer (2) from frame. Remove two straps (5 and 10) from chassis wiring harness (8).
6.
Repeat steps 1 through 5 on opposite side of frame.
TA510673
4-18