TM 9-2330-203-14&P
Section V. ELECTRICAL SYSTEM MAINTENANCE
Page
Paragraph Title
Number
Chassis Wiring Harness Repair (M197A1 and M198A1) ..................................................................
Chassis Wiring Harness Replacement (M1 97A1 and M198A1) ......................................................
Intervehicular Cable Replacement
................................................................................................
Stoplight-Taillight Lamp Replacement (M197A1 and M198A1) ........................................................
Stoplight-Taillight Replacement (M197A1 and M198A1) ..................................................................
Wiring Diagram (M197A1 and M198A1) ...........................................................................................
4-11. STOPLIGHT-TAILLIGHT LAMP REPLACEMENT (M197A1 AND M198A1).
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Intervehicular cable disconnected from towing ve-
General mechanic's tool kit
a.
REMOVALI
1.
Loosen six captive screws (2) and remove lens (1)
from body (5).
2.
Inspect preformed packing (7) for damage. If
damaged, remove and discard.
3.
Remove turn signal lamp (4), taillight lamp (3), and
stoplight lamp (6).
b.
INSTALLATION
1.
Install turn signal lamp (4), taillight lamp (3), and
stoplight lamp (6).
2.
If removed, install new preformed packing (7) on
body (5).
3.
Install lens (1) on body (5). Tighten six captive screws (2).
FOLLOW-ON TASKS:
Check operation of light.
4-13