TM 9-2330-203-14&P
4-14. CHASSIS WIRING HARNESS REPLACEMENT (M197A1 AND M198A1) (Con't).
7.
Remove two grommets (13) from frame.
8.
Remove four nuts (14), lockwashers (15), terminal (16), and four screws (18) from receptacle cover (17). Discard
lockwashers.
9.
Disconnect chassis wiring harness (8) from intervehicular cable (19). Remove chassis wiring harness and
receptacle cover (17) from frame.
b.
INSTALLATION I
1.
Position chassis wiring harness (8) and receptacle cover (17) for installation. Connect chassis wiring harness to
intervehicular cable (19).
2.
Install terminal (16) and receptacle cover (17) using four screws (18), new lockwashers (15), and nuts (14).
3.
Install two grommets (13) in frame.
4.
Install two straps (5 and 10) on chassis wiring harness (8).
5.
Install strap (5) on frame using screw (4), new lockwashers (6), and nut (7).
TA510675
4-20