SERVICE UPON RECEIPT OF MATERIEL - CONTINUED
Read and follow all instructions.
DD Form 1397
Metal straps, ply-
Using strap cutter and nail puller,
wood, tape, seals,
remove all straps, plywood, tape, seals,
CHECKING UNPACKED EQUIPMENT
Drycleaning solvent PD-680 is both toxic and flammable. Avoid prolonged breathing of
vapors and avoid skin contact. Do not use near open flame or excessive heat. Flash point
of solvent is 138F (59C). Serious illness, injury, or loss of life could result from
Using drycleaning solvent and rags, re-
move rust preventive compound.
a. Inspect for any damage during
b. Check for modification of equipment.
Check equipment against packing list for
Discrepancies must be reported in
accordance with instructions in
TASK ENDS HERE
PRELIMINARY SERVICING AND ADJUSTMENT OF EQUIPMENT
Perform the operator and organizational preventive maintenance checks and services (PMCS) as
Lubricate all lubrication points as shown in the Lubrication Chart (page 4-3), regardless of interval.