TM 9-2330-205-14&P
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
A-ANNUALLY
S-SEMIANNUALLY
ITEM TO BE INSPECTED
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED,
INTERVAL
ITEM
S
REPLACED, OR ADJUSTED AS NEEDED
A
NO.
NOTE
Perform operator/crew PMCS prior to or in conjunction with
organizational PMCS.
FRAME
1.
Look for cracks, bent members, or broken welds.
BRAKE MASTER CYLINDER
2.
Check fluid level and fill to 1/2 inch from top.
WHEEL BEARINGS AND BRAKE ASSEMBLIES
q
3.
a. Remove wheel hubs and brakedrums (page 4-76).
b. Clean, inspect, repack, or replace bearings.
c. Clean, inspect, and replace brake parts as required (page 4-43).
d. Adjust brakes (page 4-46).
WHEELS AND TIRES
4.
a. Check serviceability of tires as indicated in TM 9-2610-200-24,
Organizational Care, Maintenance, and Repair of Pneumatic Tires,
Inner Tubes, and Radial Tires.
b. Tighten wheel nuts to 450 500 ft lb (611 678 Nm).
SUSPENSION
5.
Check for bent or cracked parts, loose mountings, and worn bushings.
