TM 9-2330-205-14&P
HANDBRAKE LEVER ASSEMBLY - CONTINUED
INITIAL SETUP
Tools
Tools- Continued
Wrench, box, 9/16-inch
Handle, reversible, 3/8-inch square
drive
Pliers, diagonal-cutting
Materials/Parts
Socket, 9/16- by 3/8-inch square
drive
Cotter pin
ACTION
ITEM
LOCATION
REMARKS
REMOVAL
Handbrake
Cotter pin (2) and
1.
Using pliers, remove.
cable (1)
clevis pin (3)
Discard cotter pin (2).
Frame (4)
2.
Three nuts (5),
Using 9/16-inch socket and box wrench,
three spacers (6),
remove.
three bolts (7),
and hand brake
lever (8)
INSTALLATION
Frame (4)
Handbrake lever (8),
3.
a. Position on frame with spacers (6) in
three bolts (7),
place.
three spacers (6),
b. Using wrench, install.
and three nuts (5)
4.
Cable (1)
Clevis pin (3) and
Using pliers, install.
cotter pin (2)
TASK ENDS HERE
TA223325
