TM 9-2330-205-14&P
HANDBRAKECABLE ASSEMBLY- CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install hub and drum (page 4-79).
TASK ENDS HERE
SERVICE BRAKE
This task covers:
a. Disassembly (page 4-41)
b. Inspection (page 4-43)
c. Assembly (page 4-44)
INITIAL SETUP
Tools Continued
Tools
Socket, 9/16- by 3/8-inch square drive
Extension, 6- by 3/8-inch square
Wrench, open-end, 9/16-inch
drive
Handle, reversible, 3/8-inch square
drive
Equipment Condition
Pliers, brake-repair
Hub and drum removed (page 4-76).
Pliers, needle-nose
Socket, 7/16- by 3/8-inch square
drive
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY
WARNING
All parts of the service brake assembly will be coated with asbestos dust from the brake
linings. A filter mask should be worn whenever working on any assembly components.
Breathing asbestos dust may cause serious damage to health.
NOTE
This is a typical procedure for the left or right service brake.
