TM 9-2330-205-14&P
HANDBRAKECABLE ASSEMBLY- CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION CONTINUED
9.
Cable clamp
Clamp (2), nut (3),
Using 1/2-inch open-end wrench and
mounting
Iockwasher (4), and
screwdriver, install.
bracket (1)
screw (5)
10.
Frame (6) to hand-
Spacer (8), retaining
Using 1/2-inch open-end and socket
brake cable (7)
strap (9), two
wrenches, install.
capscrews (10), two
Iockwashers (11), and
two nuts (12)
11.
Handbrake
Adjusting knob (14)
a. Turn clockwise to tighten fully.
lever (13)
b. Turn counterclockwise 12 turns.
12.
Handbrake
Clevis (15) and
a. Using 1/2-inch open-end wrench,
cable (7)
locknut (16)
loosen locknut (16).
b. Adjust clevis (15) so that hole alines
with hole in handbrake lever (13).
c. Using 1/2-inch open-end wrench,
tighten locknut (16).
13.
Clevis pin (17) and
Using pliers, install.
cotter pin (18)
TA223327
