TM 9-2330-211-14&P
4-14. WIRING HARNESS (Con't)
ACTION
ITEM
REMARKS
LOCATION
24.
Rear of wiring
Feed through two grommet (38) holes at rear
harness (11)
of left and right main beams, through grommet (36)
hole at crossbeam, and then through grommet (35)
hole at axle crossbeam.
Pull through grommet holes (29 and 34) on left
25.
Clearance light
wiring harness (11)
and right main beams.
Front of
Wiring harness (11)
Feed forward through three grommet (32) holes.
26.
semitrailer
27.
Pull entire harness through receptacle hole (31) in
Wiring harness (11)
front of gooseneck until free.
INSTALLATION
NOTE
An assistant maybe needed to feed wiring harness through
gooseneck, axle crossbeam, and rear crossbeam grommet
holes.
28.
Front of
Wiring harness (11)
a. Feed wiring harness (11) through receptacle hole
semitrailer
(31) in front of gooseneck. Start with composite
light connectors (27) and feed rearward through
three grommet (32) holes in gooseneck.
4-32
