TM 9-2330 -211-14&P
4-14. WIRING HARNESS (Con't)
ACTION
LOCATION
ITEM
REMARKS
32.
Right main beam
Grommet (33)
Put onto wiring harness (11 ) and push into place.
Back side of front
33.
Wiring harness (11)
Pull wiring harness (11 ) along crossbeam to
left clearance
clearance light (16) and allow enough slack for
light (16)
connections.
34.
Center front
Two clips (30)
Put on wiring harness (11).
crossbeam
Two clips (30)
35.
Screw on and tighten using 7/16 in. wrench and
Two screws (23),
Iockwashers (24),
flat-tip screwdriver.
and nuts (25)
Left main beam
36.
Grommet (29)
Put onto wiring harness (11) and push into place.
Left front
37.
Two clips (21)
Put on wiring harness (1"),
crossbeam
Two clips (21)
38.
Two screws (23),
Screw in and tighten using 7/16 in. wrench and
Iockwashers (24),
flat-tip screwdriver.
and nuts (25)
39.
Right main beam
Seven clips (28)
Put onto wiring harness (1 1).
TA506853
4-34
