TM 9-2330-211-14&P
4-14. WIRING HARNESS (Con't)
ACTION
REMARKS
ITEM
LOCATION
Pull out and remove from wiring harness (11)
One grommet (35)
Right main beam
18.
using pliers.
at axle crossbeam
Using
in. wrench and flat-tip screwdriver, unscrew
Eight screws (23),
Eight clips (37) to
19.
and remove.
nuts (25), and
crossbeam
Iockwashers (24)
Spread and remove.
Eight clips (37)
Rear crossbeam
20.
and wiring harness (11)
Pull out and remove from wiring harness (11) using
Two grommets (38)
Rear of two main
21.
pliers.
beams
Pull out and remove from wiring harness (11) using
Grommet (36)
Rear crossbeam
22.
pliers.
a. Check wire markers for readability.
Eight composite
Rear of
23.
If not readable, tag to aid in assembly.
light electrical
semitrailer
b. Pull apart four electrical connectors (27) on each.
connectors (27)
4-31