TM 9-2330-213-14&P
4-22. SERVICE AND BLACKOUT TAILLIGHT MAINTENANCE (Con't).
If removed, install new preformed packing (8) in door (1).
5.
Install door (1) on body (4) and tighten six screws (2).
6.
b. REMOVAL
NOTE
Service taillight and blackout taillight are removed the same way except blackout
taillight has two plug connectors and service taillight has three plug connectors.
Tag wires for installation if identification bands are missing or not legible (para 4-20).
1.
2.
Remove three plug connectors (11 and 12) from clips (13) and disconnect.
Remove grommet (10) from framerail (9). Discard grommet if damaged.
3.
Remove three plug connectors (11) through hole in framerail (9).
4.
TA505254
4-19
