TM 9-2330-213-14&P
4-23. COMPOSITE MARKER LIGHT MAINTENANCE (Con't).
b.
REMOVAL
Tag wires for installation if identification bands are missing or not legible (para 4-20),
1.
2.
Remove four plug connectors (13 and 14) from clips (15) and disconnect.
Remove grommet (12) from framerail (11). Discard grommet if damaged.
3.
Remove four plug connectors (13) through hole in framerail (11).
4.
Remove two screws (16), Iockwashers (17), and body (8) from bracket (18), Discard Iockwashers.
5.
INSTALLATION
c.
1.
Install body (8) on bracket (18) with two new Iockwashers (17) and screws (16).
Insert four plug connectors (13) through hole in framerail (11).
2.
Install grommet (12) in framerail (11).
3.
4.
Connect four plug connectors (13 and 14) and install in clips (15).
FOLLOW-ON TASKS:
Check operation of light.
TA505258
4-23
