TM 9-2330-213-14&P
4-23. COMPOSITE MARKER LIGHT MAINTENANCE.
This Task Covers:
Installation
c.
Lamp Replacement
a.
Removal
b.
Iitial Setup:
Materlal/Parts:
Equipment Conditions:
Intervehicular cable disconnected from towing
vehicle (para 2-12).
Two Iockwashers
Tools/Test Equipment:
General mechanic's tool kit
LAMP REPLACEMENT
a.
Loosen six screws (2) and remove lens (1) from body (8).
1.
Inspect preformed packing (3) for damage. If damaged, remove and discard.
2.
Remove four lamps (4, 5, and 10) from sockets (6, 7, and 9) by pushing lamps in and turning counter-
3.
clockwise.
Install new lamps (4, 5, and 10) in sockets (6, 7, and 9) by pushing lamps in and turning clockwise.
4,
If removed, install new preformed packing (3) in lens (1).
5.
Install lens (1) on body (8) and tighten six screws (2).
6.
TA505257
