TM 9-2330-213-14&P
4-31. HANDBRAKE CABLE REPLACEMENT (M107A1).
This Task Covers:
Installation
b.
Removal
a.
Initial Setup:
Materials/Parts:
Equipment Conditions:
One cotter pin
Two Iockwashers
Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
WARNING
if trailer is not coupled to towing vehicle, ensure that wheels are securely chocked.
Failure to do so may cause trailer to roll, resulting in injury to personnel or damage
to equipment.
NOTE
Both handbrake cables (2) are removed the same way. This procedure covers one
handbrake cable.
Disconnect handbrake cable (2) from brake
1.
lever (1).
2.
Loosen two bolts (4) from bracket (3) and
backing plate (5).
TA505269