TM 9-2330-213-14&P
4-37. HYDRAULIC LINES, HOSES, AND FITTINGS REPLACEMENT (Con't).
b. AXLE LINES AND AXLE TEE REPLACEMENT
NOTE
A suitable container should be used to catch any draining brake fluid. Ensure that
all spills are cleaned up.
This procedure covers right and left axle lines (4).
1.
Remove two axle lines (4) from connectors (5 and 7) and axle clips (6).
If connected, disconnect hose (3) from connector (7).
2.
Remove nut (8), Iockwasher (9), and connector (7) from axle (1). Discard Iockwasher and connector.
3.
Install new connector (7) to axle (1) with new Iockwasher (9) and nut (8), Connect hose (3) to connector.
4.
NOTE
Instructions for manufacturing axle lines (4) can be found in Appendix G.
Install new axle lines (4) on axle clips (6) and connectors (5 and 7).
5.
BACKING PLATE LINE REPLACEMENT
c.
NOTE
A suitable contalner should be used to catch
any draining brake fluid, Ensure that all spills
are cleaned up.
This procedure covers right and left sides of
trailer.
1.
Remove backing plate Iines (11 and 12) from
connectors (10 and 5),
Install new backing plate lines (11 and 12) on
2.
connectors (10 and 5).
TA505284
4-57
