TM 9-2330-227-14&P
SERVICE BRAKES, ONE-WHEEL CYLINDER OPTION - CONTINUED
ADJUSTMENT - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install tire and wheel assembly (page 4-148.1).
2. Test operation of brakes (page 2-23).
TASK ENDS HERE
BRAKESHOE ASSEMBLIES, TWO-WHEEL CYLINDER
This task covers
c. Inspection/Replacement (page 4-86)
a. Removal (page 4-85)
d. Installation (page 4-87)
b. Cleaning (page 4-86)
INITIAL SETUP
Materials/Parts
Tools
Brush, paint, 17/16-inch
Solvent, drycleaning, PD-680 (item 18,
Compressor unit, reciprocating air
Drill, electric, portable
Personnel Required
Drill, twist, 3/16-inch
Extension, 1/2-inch drive, 6-inch
One
Gage, depth
Goggles, protective
Equipment Condition
Gun, air, blow
Hammer, hand, ball-peen, 2-lb
Air reservoir drained (page 2-13).
Handle, ratchet, 1/2-inch drive
Hub and drum removed (page 4-143).
Hose assembly, rubber
Mask, protective
Pliers, repair, brake
Pliers, slipjoint
Shield, face
Socket, 1/2-inch drive, 1/2-inch
ACTION
ITEM
REMARKS
LOCATION
WARNING
Brake linings contain asbestos fibers. Protective mask must be worn while performing
maintenance on brake linings. Failure to do so could result in injury or death to
personnel.
Change 1
