TM 9-2330-227-14&P
BRAKESHOE ASSEMBLIES, TWO-WHEEL CYLINDER - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
All parts
Look for bends, cracks, gouges, breaks,
9.
or severe signs of wear.
INSTALLATION
Two fixed pins (4)
10. Spider (3)
Using ball-peen hammer, tap into place.
Two removable
11.
Put in place.
pins (5)
Make sure slots in pins lineup
with slots in spider.
12. Two brakeshoe
Two washers (7),
Put in place.
assemblies (6)
screws (8), and
Iockwashers (9)
Two brakeshoe
13. Spider (3) and
a. Put in place.
assemblies (6) with
backing plate (10)
b. Screw in, and tighten screws (8)
screws (8),
using 1/2-inch socket, 6-inch
washers (7), and
Iockwashers (9)
1/2-inch drive.
14. Two brakeshoe
Four springs (1)
Using brake repair pliers, put in place.
assemblies (6)
Short springs goon removeable
pins.
and pins (4) and (5)
4-87