TM 9-2330-227-14&P
BRAKESHOE ASSEMBLIES, TWO-WHEEL CYLINDER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
NOTE
Both sets of brakeshoe assemblies are removed, cleaned, inspected/replaced, and
installed the same way. This task is for one set; repeat for the other.
REMOVAL
Four springs (4)
1. Two brakeshoe
Using brake repair pliers, take off.
assemblies (1) and
four pins (2) and (3)
Two screws (6),
Using 1/2-inch socket, 6-inch exten-
2. Two brakeshoe
washers (7), and
sion, and ratchet handle with 1/2-
assemblies (1)
Iockwashers (8)
inch drive, unscrew and take off.
and spider (5)
Two brakeshoe
Take off.
3. Spider (5) and
assemblies (1)
backing plate (9)
Two removable
Using slip-joint pliers, take out.
4. Spider (5)
pins (2)
NOTE
If fixed pins are not broken, skip step 5.
Two fixed pins (3)
Using portable drill and 3/16-inch twist
5.
drill, drill out.
4-85
