TM 9-2330-227-14&P
LAMP BOX
This task covers:
INITIAL SETUP
Tools - Continued
Tools
Extension, 3/8-inch drive, 6-inch
Socket, 3/8-inch drive, 7/16-inch
Wrench, box-end, 7/16-inch
Handle, ratchet, 1/4-inch drive
Handle, ratchet, 3/8-inch drive
Personnel Required
Screwdriver, cross-tip, number two
Socket, 1/4-inch drive, 7/16-inch
One
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Hook clamp (2)
a. Lift and unhook clamp (2).
1. Box (1)
and lid (3)
b. Open lid (3).
Three screws (5),
a. Have assistant hold box (1).
2. Box (1) and
Iockwashers (6),
frame member (4)
b. Using 7/16-inch socket, extension,
and nuts (7)
ratchet handle with 3/8-inch drive,
and 7/16-inch box-end wrench,
unscrew and take off.
Box (1)
Take off.
3. Frame member (4)
Two screws (8)
Using number two cross-tip screwdriver,
4. Hook clamp (2)
and box (1)
and nuts (9)
3/8-inch socket, and ratchet handle with
with 1/4-inch drive, unscrew and take off.
Hook clamp (2)
Take off.
5. Box (1)
INSTALLATION
Hook clamp (2)
Put in place.
6.
Two screws (8)
7. Hook clamp (2)
Screw in, and tighten using number two
and nuts (9)
and box (1)
cross-tip screwdriver, 3/8-inch socket,
and ratchet handle with 1/4-inch drive.
8. Frame member (4)
Put in place.
Box (1)
4-172