TM 9-2330-227-14&P
CABLE BOX
This task covers:
Repair (page 4-170)
INITIAL SETUP
Materials/Parts - Continued
Tools
Brush, acid swabbing (item 4, appendix E)
Drill, electric, portable, 1/2-inch
Rags, wiping (item 16, appendix E)
Drill, twist, 3/16-inch
Rivets (six required)
Knife, putty
Solvent, drycleaning, PD-680
Riveter, hand
(item 18, appendix E)
Screwdriver, offset, cross-tip,
number two
Wrench, adjustable, 12-inch
Personnel Required
One
Materials/Parts
Adhesive (item 1, appendix E)
ACTION
REMARKS
ITEM
LOCATION
REPAIR
Hook (4) and
1. Box (1), hasp
a. Take hook (4) off latch (3).
lid (5)
b. Open hasp (2) and lid (5).
(2), and
latch (3)
2. Chain (6) and
Screw (7), washer
Using number two offset cross-tip screw-
box (1)
(8), Iockwasher (9)
driver and 12-inch adjustable wrench,
and nut (10)
unscrew and take off.
Chain (6) with
Take off.
3. Box (1)
hook (4)
4. Hasp (2) and
Two rivets (11)
Using 3/16-inch twist drill and 1/2-inch
lid (5)
portable drill, drill out.
5. Lid (5)
Hasp (2)
Take off.
6. Latch (3) and
Four rivets (12)
Using 3/16-inch twist drill and 1/2-
box (1)
inch portable drill, drill out.
7. Box (1)
Latch (3)
Take off.
8. Lid (5)
Four strips (13)
Using putty knife, scrape off.
4-170
